Signa Brick Cladding

What is Signa?

Signa consists of a weather-resistant Rockpanel® onto which a composition – possibly designed by you – of Vandersanden brick slips is adhesively bonded. The panels are produced for you ready-to-use. In this way you can give your projects a unique and striking look.

Millions of Possibilities

Signa stands for… brick freedom. Even the most striking facades can become a reality. Vandersanden produces what you create. On the basis of 4 variables millions of patterns are conceivable. From design to implementation: we are delighted to assist you with tips and advice.

COLOUR
You choose and combine from the full Vandersanden line. We offer you a range of more than 100 colours, expanded by the 4 surface textures:
hand-moulded, formback, water-struck and aged.

FORMAT
As a basis you can use the stretcher, header and slip of five Vandersanden brick formats:

M50 ± 190 x 90 x 50 mm
WF ± 210 x 100 x 50 mm
M65 ± 190 x 90 x 65 mm
DF ± 210 x 100 x 65 mm
NF ± 240 x 115 x 70 mm

RELIEF
We can cut slips of various thicknesses for the stretcher, the header and the sole. You choose a straight or diagonal cutting line. Moreover, several parts can be used from one and the same brick.

You do not have to limit yourself to just a single cutting line. By combining several cutting lines you create an intense composition with a varying relief that is full of character.

BOND
You can apply the familiar brickwork bonds such as half-brick, English bond or irregular bond. Combinations of these brickwork bonds are achievable. Horizontal, vertical and even diagonal brick sections are amongst the possibilities. This is feasible because Signa is not laid but adhesively bonded, thus offering greater freedom.

 

<<< Contact us now for more information or Call us on (0)1844 1200>>>